glass tempering/flat glass tempering/glass tempering furnaces/flat glass tempering furnaces/glass tempering/glass tempering furnaces/gas infrared/gas infrared burners/burners/burners gas infrared/ low e/low e glass/tempering low e glass/electric infrared/infrared heating elements/quartz tubes/convection ovens/gas convection ovens/electric ovens/gas infrared ovens/gas ovens/electric infrared ovens/ovens/furnaces/gas furnaces/electric furnaces/electric heating elements/tempering flat glass/tempering low e glass.

The JF Swinehart Co., Inc.

PO BOX 510 · 1370 NORTH MAIN STREET · FOSTORIA, OHIO 44830

 TELEPHONE 419.435.6013 · FACSIMILE 419.435.0528 

 Web Page www.jfswinehart.com · E-Mail  jfs@jfswinehart.com

 

 

 

FOUR ZONE, ELECTRIC INFRARED OVEN CONTROL PANEL WITH SCR POWER CONTROLLERS FOR HEAT CONTROL AND A PLC FOR CONTROLLING THE CONVEYOR  IN A BATCH OR CONTINUOUS MODE

COMPLETE CONTROL SYSTEMS INCLUDING TEMPERATURE AND MOTION CONTROL, WIDOWS BASED OPERATING PROGRAMS, ZERO FIRE AND PHASE ANGLE FIRED SCR POWER CONTROLLER FOR HEAT CONTROL, HMI INTERFACES, AC AND DC CONVEYOR DRIVE, TORQUE SHARING DRIVES, ALL TYPES OF COMMUNICATIONS PROTOCOLS AND PLC HARDWARE..

THE PLC PANEL INCLUDES A THREE RACK PLC AND 12 ZONE TEMPERATURE CONTROL SYSTEM WITH A WIDOWS BASED OPERATING SYSTEMTHIS CONTROL SYSTEM INCLUDES 12 HEATING ZONES, 9 CONVEYOR DRIVES (3 OSCILLATING DRIVES),  4 ROOFLIFT SYSTEMS AND A  STAND ALONE PLC CABINET FOR A JFS GLASS BENDING FURNACE. THE PLC CABINET IS SHOWN TO THE LEFT.

THE ABOVE PLC SYSTEM IS A WIDOWS BASED JFS/SIM/FLEX OPERATING SYSTEM FOR A JFS GLASS TEMPERING SYSTEM. THE SYSTEM  INCLUDES TWO TOUCH SCREEN OPERATOR STATIONS THAT OPERATES A 72 ZONE FURNACE, 7 DRIVES AND 2 QUENCH FANS AND A COOLER FAN.

 GAS INFRARED CONTROL PANEL. PANEL INCLUDES A PLC WITH A WINDOWS BASED OPERATING SYSTEM, FLAME SAFEGUARD UNITS AND SECONDARY HARD WIRED RELAY BACK-UP SYSTEM THIS CONTROL SYSTEM INCLUDES 12 HEATING ZONES, 9 CONVEYOR DRIVES (3 OSCILLATING DRIVES),  4 ROOFLIFT SYSTEMS AND A  STAND ALONE PLC CABINET FOR A JFS GLASS BENDING FURNACE. THE PLC CABINET IS SHOWN ABOVE.

 
THE ABOVE SYSTEM REPLACED AN OBSOLETE THREE DRIVE MAIN DRIVE SYSTEM AND QUENCH DRIVE FOR A FLAT GLASS TEMPERING SYSTEM. THE BACK PLATE WAS BUILT TO EXACT DIMENSION OF THE EXISTING SYSTEM FOR EASY INSTALLATION. 9 ZONE, 6 DRIVE CONTROL PANEL TO REPLACE AN OUTDATED OPERATING SYSTEM FOR A GLASS PROCESSING LINE. PLC PANEL NOT SHOWN. SYSTEM INCLUDES 9@ 480 VOLT, 100 AMP, THREE PHASE, PHASE ANGLE FIRED SCR POWER CONTROLLERS FOR HEAT CONTROL AND SIX VARIABLE SPEED CONVEYOR DRIVES WITH SERIAL COMMUNICATIONS PLC RETROFIT AND WINDOWS BASED OPERATING PROGRAM TO REPLACE AN OUTDATED OPERATING SYSTEM FOR A DOUBLE BAY FLAT GLASS TEMPERING SYSTEM WITH A THREE DRIVE MAIN CONVEYOR